|
|
ReportsGermanium Nanowire Growth Below the Eutectic Temperature
Nanowires are conventionally assumed to grow via the vapor-liquid-solid process, in which material from the vapor is incorporated into the growing nanowire via a liquid catalyst, commonly a low–melting point eutectic alloy. However, nanowires have been observed to grow below the eutectic temperature, and the state of the catalyst remains controversial. Using in situ microscopy, we showed that, for the classic Ge/Au system, nanowire growth can occur below the eutectic temperature with either liquid or solid catalysts at the same temperature. We found, unexpectedly, that the catalyst state depends on the growth pressure and thermal history. We suggest that these phenomena may be due to kinetic enrichment of the eutectic alloy composition and expect these results to be relevant for other nanowire systems. IBM T. J. Watson Research Center, Yorktown Heights, NY 10598, USA. * Present address: Materials Science Department, University of California Los Angeles, Los Angeles, CA 90024, USA.
The editors suggest the following Related Resources on Science sites:In Science Magazine
THIS ARTICLE HAS BEEN CITED BY OTHER ARTICLES:
|
To whom correspondence should be addressed. E-mail: 
Science. ISSN 0036-8075 (print), 1095-9203 (online)
Magazine | News | Signaling | Careers | Multimedia | Collections | Help | Site Map | RSS
Subscribe | Feedback | Privacy / Legal | About Us | Advertise With Us | Contact Us
© 2007 American Association for the Advancement of Science. All Rights Reserved.
AAAS is a partner of HINARI, AGORA, PatientInform, CrossRef, and COUNTER.
You have reached the bottom of the page. Back to top