Note to users. If you're seeing this message, it means that your browser cannot find this page's style/presentation instructions -- or possibly that you are using a browser that does not support current Web standards. Find out more about why this message is appearing, and what you can do to make your experience of our site the best it can be.
Science Policy Alerts

Site Tools

  • AAAS
  • Subscribe
  • Feedback

Site Search

Search Advanced

Science 9 June 2006:
Vol. 312. no. 5779, pp. 1501 - 1504
DOI: 10.1126/science.1126216

Reports

High-Resolution Thin-Film Device to Sense Texture by Touch

Vivek Maheshwari1 and Ravi F. Saraf1,2*

Touch (or tactile) sensors are gaining renewed interest as the level of sophistication in the application of minimum invasive surgery and humanoid robots increases. The spatial resolution of current large-area (greater than 1 cm2) tactile sensor lags by more than an order of magnitude compared with the human finger. By using metal and semiconducting nanoparticles, a ~100-nm-thick, large-area thin-film device is self-assembled such that the change in current density through the film and the electroluminescent light intensity are linearly proportional to the local stress. A stress image is obtained by pressing a copper grid and a United States 1-cent coin on the device and focusing the resulting electroluminescent light directly on the charge-coupled device. Both the lateral and height resolution of texture are comparable to the human finger at similar stress levels of ~10 kilopascals.

1 Department of Chemical Engineering, University of Nebraska, Lincoln, NE 68588, USA.
2 Edward Via Virginia College of Osteopathic Medicine, Blacksburg, VA 24060, USA.

* To whom correspondence should be addressed. E-mail: rsaraf{at}unlnotes.unl.edu

Read the Full Text






ADVERTISEMENT
Click Me!

ADVERTISEMENT
Click Me!

To Advertise     Find Products


Science. ISSN 0036-8075 (print), 1095-9203 (online)