Note to users. If you're seeing this message, it means that your browser cannot find this page's style/presentation instructions -- or possibly that you are using a browser that does not support current Web standards. Find out more about why this message is appearing, and what you can do to make your experience of our site the best it can be.


Science 25 February 1972:
Vol. 175. no. 4024, pp. 890 - 894
DOI: 10.1126/science.175.4024.890

Articles

Lead-212 in the Urban Boundary Layer of New York City

Gad Assaf 1 and Pierre E. Biscaye 1

1 Lamont-Doherty Geological Observatory of Columbia University, Palisades, New York 10964

The radioactive emanation product lead-212 is useful in estimating rates of air exchange within the urban boundary layer. The concentration of lead-212 is negligible in air of oceanic origin as well as in air above continental areas under snow cover. On several days when conditions were such that one of these types of air mass approached New York City, measurements were made which show that the source strength of lead-212 within the city is relatively constant. On two such days vertical profiles of the concentration of lead-212 were measured from the Empire State Building, which served as a sampling tower. From the data of these profiles and a two-layer model of the urban boundary layer, we estimate the vertical eddy diffusivity to be of the order of tens of square meters per second and the residence time of air within the street layer to be of the order of S minutes. These results are consistent with the observed distribution of stable lead and with an independent estimate of the eddy viscosity from a wind profile. Under moderate wind conditions and with a mixing depth of hundreds of meters, virtually all the horizontal transport of lead-212 and other tracers with street-level sources takes place in the advective layer.





To Advertise     Find Products


Science. ISSN 0036-8075 (print), 1095-9203 (online)